Thursday, December 31, 2009

"Make it up as I go" Melomel!


So, just before crimbo, I got the instruction from "erindoors" that I needed to do something with all the bits of fruit that I'd gathered up in the freezer.

In total, it was about 4kg of fruit, that was actually about 2kg of raspberries, 1.2kg of wild plums and 800 grammes of mixed strawberry, grapes and blueberries.

So I put the lot in my steam juice extractor and switched on the gas.

I didn't know how much it would yeild, so initially I started filling a largish jar, that had previously held 1.3kg of honey. Ha! fucked up there, because in the end, the master plan was to add it all together in a gallon "demi-john" jar, but when it came to trying to open the honey jar, I found that as it had cooled, the lid had vacuumed on. So I've just put the jar in the fridge with the intention of either adding the content to the secondary ferment or to use it for back sweetening. I'll have to wait and see.

Anyway, what you see in the picture, is the rest of the fruit juice (including an odd 1/2 litre of red grape juice that happened to be in the fridge), which had about 1.2kg of honey added to it, along with a campden tablet to provide sulphite and then it was left for a couple of days.

Yesterday, I managed to get to the HBS, for a tub of Pectolase and a tub of "Precipitated Chalk" a.k.a. calcium carbonate. The pectolase is to deal with any pectins released during the steaming of the fruit and the calcium carbonate to increase, what I suspect, will be revealed as quite an acid pH measurement.

I added 2 teaspoons of the pectolase (pectic enzyme) and after about 4 hours, the sediment shown in the picture started to drop out. I'm not really worried about the sediment, it's not been fermented yet. I'm guessing but I suspect it's fibre that was contained in the wild plums that has come out of the fruit into the juice during steaming.

I've yet to make any pH or gravity measurements, as I intend doing that when the juice/must is moved to a bucket for primary fermentation. I'm not worried if the gravity is a little on the high side, as I'm intending to aerate the must on a daily  basis until it gets to the 1.030/1.020 area, before it gets moved to a demi-john for secondary fermentation.

I'm also going to rehydrate the yeast (I've chosen to use Lalvin's 71B as it will metabolise some of the malic acid I suspect is present in the fruit juice element) with some red grape juice and some GoFerm (lalvins yeast rehydration nutrient), which isn't necessarily required but as there's a high level of fruit, and consequently fruit acids, I figure there's no harm giving the yeast every chance of success.

Then, once the ferment shows signs of having started, I'll add some Fermaid-K (lalvins fermentation nutrient) and some DAP (Diammonium Phosphate). Then I'll probably add a bit more Fermaid-K at the "half sugar break" (if the gravity was 1.100 and we take it that 1.000 is finished, then the half break will be 1.050).

That's about it for the moment so I'll leave it there...

TTFN

Friday, December 11, 2009

Polish Mead ???

One of the members over at gotmead posted a link about Polish meads. I had to do a bit of messing around with my browser settings to view the linked document, to find that it was only available in Polish - which is a fucker as I don't speak any Polish.

So, after a visit to google, I managed to use their translator facility and ended up with the quoted text below (just for info, when copying translated text from google, I found that it returned the original text in Polish, followed by the translated sentence. Obviously, I don't have any Polish, so I deleted that part so it can all be understood in the context of this blog)

Definitions
Editor: patricus
21.03.2005
Definition
Mead is an alcoholic beverage resulting from the alcoholic fermentation of the wort (that honey diluted with water). Wort may be an additional dressing of herbs, hops, roots or fruit juice.
Division of mead
Depending on how the preparation of the wort or the additives used meads can be divided in many different ways.
1) The division, depending on the preparation of the wort:
• Honey saturated, that is, those whose wort boil,
• Honey niesycone (natural), or those which do not boil.
Many of the old authorities (eg T. Ciesielski) for mead drinks accounted for just saturated. Also in our association can be found as some supporters and others drinks. Many sources give the saturated honey taste better, and niesycone have a better flavor. If we are at the disposal of high-quality honey, I propose to prepare wort niesyconą, having worse sorts of honey, honey, you can cook. Syceniu its decision on whether or not, may also be dependent on the type of honey which we prepare. Honey, fruit will be better niesycone, honey spicy taste better saturated.
2) The division, depending on the density of the wort.
• Półtorak: 1 part by volume of honey and 0.5 parts by volume of water. The density of the wort BLG 57-66. Maturation of about 10 years.
• Dwójniak: 1 part by volume of honey and 1 part by volume of water. The density of the wort BLG 45-53. Maturation of approximately 5 years.
• Trójniak: 1 part by volume of honey and 2 parts water by volume. The density of the wort BLG 32-37. Maturation of about 2-3 years.
• Czwórniak: 1 part by volume of honey and 3 parts by volume of water. The density of the wort BLG 25-29. Maturation about a year.
The above maturity periods are recommended as a minimum by well-known personalities. As experience shows, however, that a particular fruit honeys are ready to drink much sooner.
Given name is the only officially approved names for the honey trade. In practice, however, such as producing honey wort with a density of 40 BLG, we can use the name półdwójniak. Similarly, for the honey and the trójniak czwórniak - półtrójniak.
3) The division, depending on the additives used.
• Natural Honey: without using any additives.
• Honey Fruit: some of the water was replaced with fruit juice.
• Honey-Herb Korzenno: prepared with spices.
Some authors distinguish a category of honeys hop - which uses only hop.
For the curious below the statutory requirements placed on manufacturers of commercial meads (content of acids, sugars, alcohol, etc.).
According to the Regulation of the Minister of Agriculture and Rural Development dated 4 February 2003., Meads:
1) are:
a) miodowowinny flavor, harmonized with the flavors of juice used, free of foreign smell - in a honey meads and grape fruit,
b) miodowowinny flavor, harmonized with the taste of juice used, without foreign flavors - honey meads in grape and fruit
c) miodowowinny taste, enriched with the taste of typical spices that are used - in the honey meads and herbal spices, d) the total acidity expressed as malic acid in an amount from 3.5 to 8 grams per liter,
e) the volatile acidity expressed as acetic acid in an amount not greater than 1.4 grams per liter;
2) include:
a) reducing sugars after inversion:
From 35 to 90 grams per liter for Czwórniak,
From 65 to 120 grams per liter for trojniak,
From 175 to 230 grams per liter for dwójniak ',
More than 300 grams per liter in the case and half,
b) ethyl alcohol, multiplied by 18 and accumulated sugar content of not less than the following values:
- 240 - in the case Czwórniak,
- 323 - in the case trojniak,
- 490 - in the case dwójniak ',
- 600 - in the case and half,
c) ethyl alcohol in quantities:
- From 9 to 12% by volume in the case Czwórniak,
- From 12 to 15% by volume in the case trojniak,
- From 15 to 18% by volume in the case of 'dwójniak and and half,
d) the sugar extract in an amount not less than:
- 15 grams per liter for Czwórniak,
- 20 grams per liter for trojniak, Czwórniak grape and fruit
- 25 grams per liter in the case of 'dwójniak, Trójniak grape and fruit
- 30 grams per liter in the case and half, 'dwójniak grape and fruit
- 35 grams per liter and half in the case of grape and fruit
e) the ash content of not less than 1.3 grams per liter in the case of mead and grape fruit.


Now considering the translation facility is a free one, I'm pleased how it's turned out, but it does read as if the translation is very literal. I understand that the term "BLG" refers to Brix measurements for sugar content readings, so if you read this but use gravity readings, then it's probably gonna be necessary to convert Brix to gravity....

Either way, given that it seems Poland, among other European countries does seem to have an extensive history with meads, it's a bit unfortunate that more info about making meads this way, isn't available.

That doesn't mean I'll stop looking.........

TTFN!

Tuesday, December 08, 2009

Additional to "Sloe Gin"...........

Further to Marek's comment about making a "Blackthorn" melomel......

Well that's a possibility already, as I still have 4lb (just under 2kg) of sloes in the freezer at the moment.

The only thing that's got me thinking, is that given that sloes are of the "prunus" family, according to Luc Volders blog, when making "Plum" wine, it's a good thing to soak the fruit in "Soda Ash" for 24 hours first, to remove the waxy/fungal looking "bloom" from the fruit as this can cause a haze that's hard to clear from the finished product.

I'm unsure whether sloes are closely enough related to plums that this might be an issue ? Either way, I'll probably just put the fruit through my "steam juice extractor" and then add most of the juice, but reserving a little for back sweetening/flavouring after fermentation is complete.

Also, as I understand that plums can be quite high in malic acid, what yeast to use ? 71B would be good as it will metabolise some of the malic acid during the ferment, but I don't want to loose any of the fruitiness of the sloes.....

Thursday, November 19, 2009

Things that can make home brewing, erm, difficult!


A rough day last friday (weather-wise)........

So I pull the truck over to wipe down the nearside mirrors (nice and responible eh?)

I'm wet, my boots are wet, as are my gloves...... I can reach most of the mirors, but have to use the step and mirror arm to reach the top mirror...wet gloves mean I can't keep hold of the mirror arm so slip off the step, landing in a puddle that happens to be concealing a piece of plastic (one of those clear plastic "document wallets" I think it was).

This ends with me going "arse over elbow" and landing on my hip and wrist (luckily my left one - being right handed).

It didn't hurt to start with, then after an hour or so, it was sore, so I take a couple of nurofen tablets, still believeing that is just a sprain, only to find that by lunchtime I can't change gears or work the handbrake of the truck, so off to the hospital, only to find, after "they've" taken an xray that I've broken the top part of my left radius a.k.a radial styloid (I think that's what they called it anyway).

Which means that if I want to do anything with a batch of brew larger than 1 gallon, it's out of the question for about the next 4 weeks!

Damn, damn, damn!

Sunday, October 18, 2009

Bottle Bombs.....a salutory lesson!

Last week, "erindoors" made some chutney (green tomato....) Part of the recipe included some root ginger.

Initially, she was gonna use a recipe from Mrs Beeton, but ended up using a James Martin recipe.

Anyway, there was some root ginger left over, so I collared it to make some ginger beer. I got the recipe from the net (one that I've used before) and it turned out that I had enough ginger for 10 litres.

So I mixed it up i.e. 2 x 2 litre bottles and 2 x 3 litre bottles. I then put it on top of the kitchen cupboards so I wouldn't get nagged about it taking up room in the kitchen.

Now normally, you'd wait about 24 hours for it to get to the stage where the bottles can't be pressed in and the plastic stays firm/hard, then you'd put it in the fridge. Whereas, because I'd put it on top of the cupboards, I remembered it at about 0600 on Wednesday morning.

Actually I noticed that the 2 x 2 litre bottles were starting to stretch under the internal pressure...... so I took the bottles down from the cupboards and put them on the floor in front of the fridge..... as I was picking up on 3 litre bottle, I knocked the other one over and it exploded.

So apart from some grazes and bruising on 1 hand and 1 shin, plus ginger beer all over the inside of the fridge, the outhouse (where the fridge is) and over both the cats that were eating their breakfast biscuits behind me (no injury or harm.... fortunately), oh and having been dazed by the explosion a bit, no harm was done.

I realise that I was lucky to be making the ginger beer in plastic bottles, because I'd have probably have suffered harm if it had been glass. But it also points out that to have exploded a plastic bottle like that, there must have been a hell of a lot of pressure built up inside.

I mean, the whole point of making ginger beer like this and then chilling it, is because you want to stop an active ferment with the cold of the fridge so that it carbonates the ginger beer, but doesn't ferment all the sugar so there's still plenty of sweetness left. But caution must be observed as this method has fundamental hazards to it, especially, if like me, you forget to get the bottles into the fridge soon enough.....

Apart from that, it makes a nice drink.......

TTFN

Saturday, October 03, 2009

Sloe Gin.......


I've been watching the sloes for weeks, and it's been bugging the hell out of me as they haven't been ripening consistently because of the slightly weird weather.

My first mission, I managed to pick 5lb 9oz's, which, according to the recipe I found on the net, was a little over what was needed (the recipe suggested 1 pint of gin, to 1lb of sloes, to 8oz of sugar...... optional cloves, cinnamon, almond extract).

As it was more fruit than needed, I just thought "what the hell", but with just the gin and fruit in a 1 gallon demi-john, there was no room for the sugar.

So, what to do? Well my only option is to make it in my 5 gallon (5 US gallons/19 litre) jar. I just decided that I'd make a larger quantity instead.

With that in mind, I went out a second time to pick fruit but only managed to get about 1lb 8oz's before it got dark (actually also because where I went, most of the Blackthorn was on a bank that I couldn't get up to get too any more fruit than that).

So today, I went to a different place. It's on the side of a busy main A road, but there was a place I could park my car about 500 metre's up the road and the actual bushes where about 2 or 3 metre's from the road. When I got there, I couldn't believe my luck. The bushes where absolutely heaving. So I just "picked away" until I found that the plastic carrier bag I was using was cutting into my wrist. I've ended up with another 8lb 4oz's. Excellent.

I haven't used "paid for" gin. A friend bought me some cheap Polish vodka when he went home last and I've just bought commercial gin flavouring to mix with that (it makes very good gin).

Apart from the first batch of the fruit, which is still in a 1 gallon demi-john with it's gin, all the rest of the fruit is freezing down, as the "freeze/thaw" method is far less laborious than trying to prick the skin of each and every sloe for the spirit to get at the sloe flesh. Tomorrow, I'll just put it all in a bucket, I'll add the rest of the gin to defrost the fruit enough so it's not in a big lump when it comes out the freezer, then I'll use a funnel to get it all into the 5 gallon jar. Only then will I add the sugar, which I'm intending to add at a rate of 4oz's per pint. How sweet I want it, well that's gonna depend on how it turns out. It's easy to add more sugar if it's not sweet enough but it's a bastard to get it out again.......

{edit}Ok, so I've added the picture for you to see. It's only just been mixed. I've given it a single shake (and not a particularly vigorous one though). You should be able to make out the layers i.e. the remnants of the 3lb of sugar added (equates to 4oz per pint of gin), then the lighter looking sloes, which are the ones that have been in gin for about a fortnight (in a 1 gallon demi-john), ontop of that are the sloes that I picked, washed/rinsed and froze yesterday and finally, the layer of both the older gin from a fortnight ago and the 4.5 litres that have been added this morning (Sunday, October 4th).

I've situated a torch/flashlight, behind it so you can get some idea of how the colour from the fruit develops. The gin from the 1 gallon DJ was a beautifully dark maroon in colour, and it doesn't seem to have been diluted too much by the addition of this mornings 4.5 litres of gin. I hope that you can see enough of the colour showing through the liquid to get some idea.

I haven't added any of the optional spices at this stage as I'm still thinking about how much and which ones to use, though I suspect I'll add a single clove (powerful little buggers...... as my efforts at making Joe's Ancient Orange Spiced Mead have shown), plus I'm not sure about the cinnamon as the pack I have is from India, and is actual pieces of bark, not like the ones that the Schwartz spice company produce, all nicely curled up into little "tubes". I don't want to use too much as I'm aiming at a hint of flavour, and don't want to over power it (all the effort I've gone too so far, and it would be a complete pain in the arse to fuck it up......).{/edit}


TTFN!

Sunday, August 23, 2009

Treasure!

Treasure!
Ok, so what the hell is the picture and title all about ?

Some while ago, when I was both reading and contributing to some wine making forums, I was getting excellent answers to my questions and enjoying generally good "chit chat" with another forum member. All of a sudden, he wasn't there and when I did a bit of digging, found that he'd been banned. Now I'm not privy to the exact "why's and wherefores" of what led to his ban, but after a while, I emailed him and since then we've got on very well.

When the facilities are available, we either do "messenger based" video conferencing, or as is currently the case, send voice clips (again via messenger) and chat that way. It's brilliant for me, as this fella does seem to know his stuff....... like having a remote mentor for guidance and advice.

This chap is in the US (lots of mead makers there) and had mentioned an enjoyment of "english tea", so I got his address and sent him some (actually it was rather specific tea, but that's another story). Not so long ago, he mentioned that he was nearly out of tea so I sent another box (the tea we have at home is in 1.5kg boxes). Now as with anything sent internationally it's usually not the cost of the item(s) but the cost of the shipping that's an issue. If you use a commercial parcel carrier, like UPS, or maybe DHL then they seem to want to charge astronomical prices. I've found that it's often cheapest for something like 1kg + to sent it "small package airmail parcel post", via the Royal mail. The last box of teabags, put in a plastic posting envelope, cost me about £18.50 (plus the cost of the teabags of course).

So I was quite amazed when a parcel turned up last week, containing the items in the picture.........

That parcel weighed in at about 13lb. My friend had tried to find a reasonable quote to send it, but the likes of UPS etc where quoting figures like 170$US + for it. He actually managed to send it for 69.90$US, courtesy of the United States Postal Service...... excellent. That's what I'd call a reasonable charge for posting.

So why have I titled this post/picture as "Treasure etc" ? Well as you can see from the picture, there is 1 gallon of his local wild flower honey (and very good honey it seems to be), plus you can see 4 different packs of RedStar yeast, the RedStar brand not being available in the UK (apparently), there's the 2 white sachets of Potassium Metabisulphite as well as the small bottle of it - again, it's hard to track down the Potassium Met' here, as it seems for reasons I don't follow, the UK home brewing industry pushes Sodium Metabisulphite for adding sulphites to wines/meads and for cleaning/sanitising (it seems that if you can find it, then it's about 4 times the price of the Uk available Sodium equivalent).

Then there's the "Yeast Energiser", which is pure Diammonium Phosphate. A good source of nitrogen for yeast, which is not readily available here in the UK, except as "combined nutrients" like Tronozymol. Which can be a bit of a PITA if you only want to add a little extra DAP and not the other stuff in the combined nutrients.

Finally, there's the last bit of treasure, part of a commercial pack of Lalvins D21 yeast. This strain of yeast is a "Maury" yeast isolate. It's as close as I can locate to being the "Maury yeast" that is mentioned by the late Brother Adam of "BuckFast Abbey" fame (in the Bee keeping world - but also a noted mead maker). It seems that it's not normally available as the small 5 to 8 gramme home brewing sachets (except from a couple of locations in the US and Canada). So to have obtained enough to try a couple of different meads is wonderful. I'm intending to break the package down into small quantities as I want it to last as long as possible (I'll be making it up as "yeast starters" to ensure it's working OK).

I'm very grateful to my friend in the States. He's said that if I want to order any small items like yeast packets etc that aren't usually available here, then it's fine for me to have them posted directly to him so he can forward them on...... which is handy for small stuff like sachets of yeast as they only weigh a few grammes each and he can just put them in an envelope and stick airmail stamps on them...... Brilliant.

So Keith? thank you very much for your efforts mate, they very much appreciated. As is the offer of being able to use your address to have stuff sent/forwarded.

I can't wait to get a batch of mead on the go now.... Brilliant.

TTFN

Sunday, August 02, 2009

more Mixed Fruit Melomel

So, yesterday I decided it was time to rack the mixed fruit melomel. It syphoned off the lees nicely as the yeast had flocculated nicely (I poured the bit that was in the 1 pint milk bottle in). This all went into a 2 gallon bucket and the last of the mixed fruit juice was mixed in. Then it was a case of adding sulphite (1 campden tablet in dissolved in a little water), sorbate to stop any re-fermentation and a couple of teaspoons of pectolase (pectic enzyme) to remove any pectin haze that might have been caused by the extra juice.

Once done, this was split into the 2 jars in the picture (a 1 gallon one and a half gallon one). I did a gravity check, as the mixed fruit steamed juice would have increased the gravity - and despite it being nearly half a gallon of juice added to just under 1 gallon of the melomel (1 gallon minus the bit lost during racking and left in the lees) I still had 1 and 3/8th's of a gallon. The gravity only showed as 1005 on the hydrometer. I didn't check the melomel before racking/blending with juice as it was below 1000 last time I checked it.

I then adjusted the levels in both jars so that they were proportionally the same (not so fussed about the actual measurements), and then topped them both up with 75% alcohol (Polish Vodka) that I had so it's fortified a little bit and won't suffer any drop in % ABV caused by mixing in the extra bit of mixed fruit juice.

I'm actually quite pleased how it's looking. As you can see from the photo, it's looking reasonably clear, and the extra juice will have given it a more fruity flavour.

I won't know until I taste it whether it's more of a "summer wine cooler" type drink or something a bit more "fruity" wine-like. I'll have to wait and see won't I......

TTFN!

Sunday, July 19, 2009

Mixed Fruit Melomel 2.......

Ok, so here's what it currently looks like. It's been a little over a fortnight and the yeast has dropped just nicely.

Oh and if you think I made a mistake in leaving the air space, that was the minimum I needed to leave to stop it foaming out into the airlock. Either way, both the main ferment and the small amount in the milk bottle will have been prevented from oxidation by the CO2 rich atmosphere in the airspaces....

During the main ferment, I'd planned to add a bit more nutrient at either the 1/2 or 2/3 sugar break. In practice I checked the gravity after 2 days of active ferment and it had dropped from 1.100 to 1.010 i.e. a 90 point drop. I did panic a little as I was surprised to see that it had changed so much, so quickly.

What did I do ? I added a further 1lb of honey to bring the gravity back up a bit. No I didn't test it, I just added the extra honey, give it a gentle stir and then added the 1/2 (I think it was 1/2, not 1/4) a tsp of Fermaid-K nutrient.

Now my current intention is to rack it off the sediment check the gravity and then add some sulphite prevent spoilage, and then sorbate it to prevent it starting to re-ferment when I add the rest of the fruit juice. At that stage, I'll probably have to mix it in a bucket as it'll be to much for 1 demi-john, then mix in a good dose of pectolase, after all, the juice has already been heat treated and I want it to clear, even if it does take a long time...

Then I'll put it back into a DJ (probably split between a 1 gallon one and a 1/2 gallon one) to clear.

TTFN.

Tuesday, July 07, 2009

Mixed Fruit Melomel.......

When we've done our weekly shop, any soft fruit left over is washed, trimmed, picked over and then bagged/frozen.

This means that over the last 6 to 9 months, I ended up with 4kg of Strawberries, eating grapes, raspberries, black berries and a few blue berries.

I'd already decided to make it into a Mixed Fruit Melomel (a melomel being a mead that's made with fruit).

As this seasons fruit is starting to be ready for picking, I decided to get it out the freezer and put it through the steam juice extractor (see earlier posts about that).

Anyway, I ended up with about 4 litres of juice, which tasted mainly of strawberry (which was the bulk of the frozen fruit). I couldn't decide on the method I would use..... so a little consultation with a friend in the US who's made a number of melomels, I decided that I'd make up a must with honey (3lb of cheap supermarket honey initially), about 1.5 litres of the juice and make up the rest to 1 gallon with distilled water. I did remember to add a campden tablet to the juice about a week before as I was concerned that the juice would start to go off or maybe ferment naturally - though that wasn't so much of a consideration as it's pretty sterile/pasteurised when it comes out the steam juicer.

I put that into a 10 litre bucket, and then added 1 teaspoon of Tronozymol yeast nutrient and 1 teaspoon of "mead acid mix" (the mix is 2 parts malic acid to 1 part tartaric acid - the idea taken from Ashton and Duncans book "Making Mead").

The gravity reading was 1.100 (which some of the bod's at WAH would have said "too high" - but this is a mead, not a "normal" fruit wine).

I'd looked at what yeast I had in stock and decided on Lalvin's D47 - don't ask why, as it probably wouldn't make sense.....

I rehydrated it as per the instructions but was a bit concerned as all it did was absorb some water, no bubbling or anything like that at all. I thought "fuck it" and pitched that into the must.

Now I'd used a 10 litre bucket as it would allow for some foaming that sometimes occurs when a ferment starts, by Monday morning, the small piece of cotton wool I'd put into the airlock grommet in the bucket lid had been blown out. So I quickly sanitised a stirrer and stirred/aerated the must. Replaced the cotton wool and went to work.

By Monday evening, the must had blown the cotton wool back out of the grommet and had foamed out into the top of the bucket - I've never had a must that has foamed so much.... amazing.

This morning, I sanitised the stirrer again and aerated the must. Oh I forgot, I'd changed the cotton wool for an airlock on Monday evening.

This evening, I decided it was time to see how the must was getting on. I took a sample and checked.........."fuck my old boots" went straight through my mind when I saw that the hydrometer was sitting at about 1.015 - that's a drop of 85 points in 2 and a half days. Talk about fast and furious ferments.......

Anyway, it's been stirred again, plus I've added another 1/4 teaspoon of Fermaid-K yeast nutrient. I also decided to add another 1lb of honey which as been warmed up to pour easily and put it in. The idea behind that being to bring the gravity back up, so that tomorrow morning, I can stir the must and then rack it into a demi-john - I've got a couple of 1 pint milk bottles on hand just in case it's a bit more than a gallon (due to the size of the top, 1 pint milk bottles make ideal emergency fermenter a bung/airlock fits perfectly).

Once it's fermented dry, I'll sulphite it and stabilise it because I will back sweeten it with the rest of the juice.

The idea of making it that way, is because the fermenting process can be quite hard on the fruit flavours and as I don't want the honey to be the main flavour, it should (in theory) taste mainly of the fruit juice.

It's all a bit experimental as I haven't made much melomel. I'll see how it turns out. Oh, and because I'm hoping that the fruit flavour is the predominant one, it doesn't matter that the honey is cheap blended crap. Nothing of a good varietal honey will come through in the flavour anyway - or that's what I intend.

TTFN