Saturday, May 24, 2008

Last weekend - I forgot to ............

Post that I'd made another couple of batches of "Joe's Ancient Orange" (mead, that is).

Except I didn't use orange, I used a mix of lemon and lime (I found a recommend for that on one of the forum sites I post at).

I made 2 batches, one was the base recipe with bread making yeast, the other one was the base recipe but with Lalvins 71B wine yeast. I could also have used Lalvins D47, both of these yeasts seem to make good meads.

They're both bubbling away nicely. The other 3 batches I made a couple of weeks ago (maybe as much as a month - I think I explained about them in a previous post), have stopped bubbling and cleared quite well. I prefer to wait until the fruit has dropped to the bottom of the fermenter, so it'll be another few weeks before I filter/bottle them - I might even just move them into fresh, clean/sterilised demi-johns too "bulk age", that way I'll be less tempted to drink some of them and I can use them for birthday and crimbo presents later in the year! Though I might have to give them a little test, as I don't yet know what the lemon flavoured and lime flavoured ones are likely to taste like. I suppose it won't hurt to check them ;-)

Ho hum !

Saturday, May 17, 2008

The latest "acquisition"

So, pictured is my latest purchase.

It might not seem much, just a couple of bags of powder. Except that these products (as per the labels - Go-Ferm and Fermaid-K) are probably harder to find in the UK than "Class A" drugs!.

Why? I don't know for certain. They (well, specifically the Fermaid-K) seem to get mentioned quite widely if you read up on anything to do with wine making, specifically "home" wine making.

No one seems to stock either of them in the UK, though I'd guess I might be able to get it directly for Lallemands UK office/representative(s), if I could find out where they are, and could afford however much the "minimum" is.

I had to get it from a "shop" on ebay, who are based in Texas (Dallas I think it was). Now it doesn't work out any cheaper from the locally available yeast nutrients (actually there doesn't seem to be any local equivalent of the "Go-Ferm" anyway).

How much was it ? Well the Go-Ferm was 22.95$US and the Fermaid-K was 16.95$US. It cost me about 28$US for the post and packing. So in "real" money the Fermaid-K is £1.93 per 100g or £3.52 per 100g including shipping. Which, as the local equivalent "Tronozymol" is about £2.50 per 100g without any postage charge, isn't that expensive. Dearer yes, but only time will tell if it's better or worse than the "local" stuff.

The Go-Ferm worked out at £2.60 per 100g or £4.19 per 100g including the shipping.

I've never used either of these products before (only the "local" stuff), so I can't say what they work out like or "taste" like when they've been used in making a batch of mead/wine, but I'll post how I get on with them, as and when.

The ebay "shop" I got these from is Nashwood Winery. So if you are interested you can also look to see if you think it's worth the effort. I was "carded" for them on Thursday, so it took about 8 days for them to arrive from the US, which I didn't think was too bad - of course, you could also probably arrange to get them quicker, but it'd probably cost more in shipping charges.

TTFN!

Saturday, May 10, 2008

Barshack Ginger Mead (with added fruit)
Ok, so I've just racked the Barshack Ginger Mead (with added fruit - as suggested in Charlie Papazians' recipe in "The Complete Joy of Home Brewing").

I'll admit that I couldn't recall what exactly it was i.e. I'd made some "Winter Mead" as well but couldn't for the life of me remember if it was this or I'd already got it bulk ageing.

Anyway, after ploughing through the blog I managed to work out that this is the Barshack Ginger recipe.

The picture doesn't show how clear it was in the bottle - the pint in the piccy is from the bottom of the fermenter so I'd expect it to be a little more cloudy.

Plus, if I wasn't so bloody hap-hazard in my wine and mead making, I'd have known which recipe it was and what the added fruit was. Either way, I managed to get 3 and a half imperial gallons from a 19 litre batch (I ditched the last bit as I couldn't be bothered poncing about in putting it into something to try and remove a bit more of the settled sediment).

The only thing I knew for definite, was the last time I racked it, I added 700 grammes more honey, which seem to have fermented out (the gravity is currently .995) and that because I was being impatient, I added some of this "wine smoother".

As I haven't got a "yard stick" to tell by, I can't say how well it's worked, but it's smooth enough for my tastes, not as rough as it was when I last tasted it (first racking in Feb last), and overall, I'm pleased with how it's turned out - I'm happy to leave it in the 3 X 1 gallon and 1 X 1/2 gallon jars it's been racked into (and campden tablet added) too "bulk age".

In other words, now it's done, I may think about bottling it in a couple of months time, but that depends on whether I can get some champagne type bottles/stoppers, or whether I can get enough "beer" bottles and crown caps (easier of the two options), or whether I can be bothered and just change the stopper/airlocks for just stoppers/corks and leave it under the stairs.

What else have I done ?

Oh yes, I've racked the "Heather Honey" batch again, as the "straining bag" trick either didn't work or it's just allowed some more of the granular/globular sediment to settle out. I also topped it up with a further 8 oz of honey and water to up the gravity. It was at about 1005, so I'm hoping that the extra honey will have brought it up to 1015, as I want a sweet mead from this honey - oh and when I racked it the first time, I tasted the granular stuff and it was sweet so I'm wondering exactly what it was, but suspect if might be pollen/sugar that's taken on this appearance for some reason - unknown to me (I looked at the honey this time round in the daylight and it seems that there was some granules in it - they tasted sweet as well so I'm not really any closer to understanding exactly what they might be.

Over all, it has a nice "honey" aroma, though the taste is still a little raw (to be expected).

I'll post another picture when it's cleared some more.

TTFN!

Sunday, April 27, 2008

Heather Honey Mead latest!

Damn I must try and not let my impatience get the better of me!

So, what's happened?

Well, having read about the relative importance of getting a finished ferment off the lees, I decided to rack it, but rack it through a straining bag i.e. because the strange, granular sediment that you nearly can't see because of my crap photography in yesterdays post.

Anyway I just figured that if I can remove the granular sediment it would be easier to judge the clearing process (the granular sediment looked like it was about 1 inch deep).

I racked it through a syphon tube into the straining bag to try and catch any of this, that went up the tube. It seems that I've been reasonably successful. I didn't squeeze the bag, just pulled it out of the "new" demi-john jar gently.

On inspecting the "granular" sediment, it looked very much like dark honey coloured cheese curds, with a strong honey aroma. So I'm suspecting that it's either fine wax type debris or possibly pollen.

Either way, it should now allow the mead to settle properly and clear. At the same time, I've added 4 oz of the heather honey as the gravity reading was still at 1003 and I want some residual sweetness - putting that in now might have not been the best idea, but I figured that it would allow any other debris in the honey to settle with the yeast as it drops out of solution (and no I haven't re-checked the gravity, I'll do that after the next racking).

I also added a dissolved campden tablet - I had to top it up with about 200ml's of water to allow for the racking loss.

As far as I can see, it's still looking good !

TTFN!

Saturday, April 26, 2008

Update 26/4/08

Weird Granular AppearanceThe two basic/traditional mead batches seem to be going OK i.e. the restart/blend/mix batch (12 litres) has got to 0998 gravity and pH of 3.90 whereas the heather honey 1 gallon batch has got to 1003 gravity and a pH of 4.11

The only odd thing is that the heather honey batch has dropped such a weird looking sediment. Very granular in appearance. Almost as it there was wax or something mixed in with the honey (there wasn't as far as I could see). I doubt whether this is a problem, so I'm thinking that I'll strain it out somehow, which should allow the mead to drop a sediment normally.

There's only a small amount of sediment showing at the bottom of the mixed/test batch, so I'll just rack that off it and chuck a campden tablet or two in it and allow it to clear naturally.

Apart from that, these two seem to be going fine.

The 3 batches of the "Joe Mattioli Spiced Orange" mead (whether I used orange or a different citrus fruit) seem to have slowed down. As they've only been going for a month or less, I'll just leave them to settle/clear etc. I did have a small victory today though, I went round to the local "scummerfield" branch for a few bits and noticed that they were doing the "cheap honey" deal again i.e. 2 X 1lb jars for £2.50 so I got 4, with a view to knocking up a batch of the Spiced Orange recipe, but with lemon and lime, though stupidly I went a bought a lime and an orange. I'll get another lemon tomorrow I suspect and make it up then - it only takes about 45 minutes or so to do.

The picture of the granular sediment in the heather honey isn't a very good one, but it does give you an idea how much as settled out of it - it doesn't look like flocculated yeast sediment though - and some of it seems to have attached itself to the side of the demi-john. As I say, weird.

TTFN

Sunday, April 20, 2008

Updates and confusion W/E 19/4/08

Well I've just tested gravity and pH of the two mead batches I have on the go.

The "Heather Honey" batch is giving me a gravity of 1008 and pH of 4.04, while the "mixed/test/whatever" batch (named as such as it was originally an experiment to see how I got on with Wyeast Liquid yeasts - both sweet and dry mead yeast - but as they stuck and I couldn't work out why, I mixed them and re-started with EC-1118) is now at a gravity of 1000 and a pH of 3.88

So what's the confusion?

Well, the only thing I've done with the heather honey batch is to top it up to the bottom of the neck of the DJ to exclude as much air space as possible. So by current gravity readings it's dropped about 132 points and off the top of my head I can't remember the calculation for working the % ABV, but with it's original starting gravity of 1140 it should be (once it get's to 1000) about 19 + % ABV, which is a little weird because K1V yeast is supposed to "poop out" at about 16 % (according to the yeast data I can find). Though I'm wondering if the reasonably high amount of nutrient that the instructions/box suggested, might be the reason why it's gone on fermenting. My usual tasting of the little bit I used to check the pH is predictably "not very nice" i.e. it still has a good honey taste/aroma, but it's also now got a "alcohol hot" taste, but that should normally age out of it.

I'm also guessing that the small amount of increase in pH levels might be to do with the topping up and the addition of the bubble scum/debris that had formed on the top of the inside of the glass, that's now mixed it.

Appearance-wise, it's a nice colour, but there is currently a layer of granular looking sludge (about 3/4 of an inch deep) on the bottom - that should settle/filter out so I'm not overly worried by that.

Otherwise it's looking good.

As for the mixed batch, well that's also slowed down. The Greek honey I used hasn't retained so much honey taste, but is equally dry and "alcohol hot" tasting. There isn't any noticeable lees settled out yet.

I'm guessing that I'll have to back sweeten both of these meads - I've got some heather honey for that batch but I'll have to go to Lidl's to get a jar of the greek for that batch.

Despite the hassles I've had with both of these batches, they are turning out to be good - well I can't say for certain, but they should both, at least, turn out to be "Ok".

Hum? I wonder if it's a good idea to rack and sulphite them? Then sorbate and add some honey and then leave to clear/bulk age ? Probably better to wait until they've started to clear before I sorbate and back sweeten - but I'm thinking I'll rack them next weekend - plus the campden tablet should stun the last of any activity out of them.

I'll have to think on it some more and wait and see

TTFN!

Sunday, April 13, 2008

Commercially made Meads "review"

Some "half bottle" Samples of Commercially made Meads
During some recent difficulties in my mead making (stuff like not enough nutrient/too higher starting gravity/not enough "pre-pitching" oxidation of must), someone at one of the forums I post at, suggested that I try to obtain some commercially made meads to taste and measure. "A damn good idea" I thought.

Previously, when I'd visited Middle Farm, for some cider, I'd noticed that they did have some commercially made mead, but only 1 or 2 different types. When I visited yesterday, I found that they keep considerably more than that, so I got myself the 4 half bottles pictured.

They are Lindisfarne mead, Lyme Bay winery Mead, Lurgashall winery Mead and Witham Friary Mead.

Today, I proceeded to open each bottle, take a gravity reading, tranfer most of the sample back into the bottle, retaining a small amount to take a pH measurement from and then drank the small amount to see what it tasted like (I had previously tasted commercially produced mead, but that was some years ago).

So, the readings were as follows - Oh and I'm not an experienced wine taster so I'll just put a basic description according to what I found.

The Lindisfarne Mead. This is the lightest in colour. It gave a gravity reading of1042 and a pH reading of 3.01 - the taste was sweet, with a very light, barely obvious honey flavour. Palatable and pleasant.

The Lyme Bay Mead. This was the second darkest of the samples, being a "whiskey" colour. It gave a gravity reading of 1040 and a pH reading of 2.90 - it was equally sweet, but with a much stronger honey flavour. Very nice.

The Lurgashall Winery Mead. This was between the Lindisfarne and Lyme Bay for colour, similar in tone to a white wine. It gave a gravity reading of a massive 1065 and a pH of 3.50. It had a similar honey flavour to the Lyme Bay Mead. Again, very nice.

Finally, the Witham Friary Mead. This gave a gravity reading of 1038 and a pH reading of 3.20, it was by far the darkest in colour, similar to a dark/black rum. With a strong, slightly floral/citrus type hint to the flavour. Sweet. Again, very nice, but not as "good" (sorry I can't really define why I felt this) as the Lyme Bay.

So of the 4, my favourite is the Lyme Bay, followed by both the Lurgashall Winery and the Witham Friary ones equally (though again, I can't really explain why I thought they were so different, yet equally as good), followed up in the rear by the Lindisfarne Mead.

Now this is, but isn't surprising. It is, because Lindisfarne mead is one of the better known ones in the UK, but it isn't. Just because you have a "known" brand, it doesn't mean that yours is the best product.

I'll finish by saying that if I can manage to make anywhere near as good a mead as these, then I'll be very happy. At the end of the day, none of them are rubbish, but I did expect the darker ones to be the stronger tasting and possibly the better, but the Lurgashall one disproves the darker is stronger/better idea.

Oh and they are all about 14.5% ABV

The other thing that was confirmed by this test (and one that I was beginning to wonder about) is that I do, very much, like mead.

TTFN

The "Heather Honey" batch!

The heather honey batch as it looks today!
Well, I don't remember whether I mentioned how I got round the problem of the surprisingly high pH reading I was getting from the batch so I tell it (again?) here.

I'd got it mixed up with all the ingredients, including the 1 teaspoon of citric acid, but the pH was still high, so out of confusion/desperation/lack of knowledge etc, I just put a further 2 teaspoons of tartaric acid in it and then matched it with a further 1 teaspoon of citric - totalling 4 teaspoons of acid.

Now I thought that was way too much, but after getting some advice, it still seemed like a lot, but probably not excessively so.

The following day the pH was down to 4.3, which I was much happier with (and it was inside my "comfort zone").

So I pitched the yeast (Lalvin K1V-1116) during the mid morning and I'll be damned if it was happily bubbling away by the evening.

Yesterday afternoon I was doing some checks on my current ferments, and the heather honey was giving me a gravity reading of 1045 (down from 1140 the previous week) and a pH reading of 3.95 (down from the 4.30 of the previous week).

As for the taste ? Wow!, if I could have, I'd have drunk the lot there and then. Apart from the obviously present "yeastiness", it had a nice, strong honey flavour - though I suppose that's to be expected with heather honey, with a good sweetness - again, not surprising given that it was at a S.G. of 1045

The honey is a little curious, because I couldn't find out whether the heather base for the bee's, was bell or ling heather. Also, it was very, very viscous - I'm guessing somewhere in the region of twice as "thick" as normal processed wild flower honey. It also looked a little granular, though why that might be, I don't know.

TTFN

Saturday, April 05, 2008

So much for "my latest brew"!


The other week, I got my hands on some of this excellent sounding honey. I haven't got a clue what it really tastes like, but today I got round to making a brew of it - well sort of!

Sort of ? I hear you say. Yes, sort of.

What I mean by that, is that I started making it - as per usual. I'd got the honey in the demi-john jar (4 lb of it). It was partially dissolved i.e. I'd used warm water to rinse out the jars. I'd then added a pint of tea and a campden tablet, followed by the yeast nutrient (Gervins "Minavit" - the amount suggested is a bit weird - it (the instructions) say 1 to 2 grammes per gallon or 6g/litre for sugar solutions fermenting for high alcohol. As I say, weird). I'd then topped it up to about three quarters/four fifths full, but before I added the citric acid and then the yeast, I thought it sensible to check both the gravity of the "must" and the pH.

I was expecting quite a high gravity - my expectation was bourne out. It was 1140 - high enough to produce an alcohol content of 20 to 21%. Fine thinks me, just check the pH and I'll be ready to pitch the yeast.

This is where it went to a complete sack of shit ! It's my understanding that honey is acid, so I don't know what kind of pH reading I should get, but I certainly didn't expect 6.36 - 6.36 ? what's the relevance of that?

Well, you may or may not know, the pH scale is from 0 to 14, 0 being acid as fuck and 14 being alkali as fuck (both extremes are very corrosive). Neutral is 7. Most water sits either one side or the other of 7 i.e. water is pretty neutral.

As I said, I didn't know what to expect, maybe 4 or 5 ??

The idea being, that the brew is acid enough to start at a theoretical ideal of 3.3 - some people will add some acid to a brew to bring the numbers down, others not. Either way, the recipe suggested a teaspoon of citric acid anyway.

The stress kicks in, with the sensation/feeling of "WTF" (WTF=What the fuck?). So initially, I get the pH meters' buffer solution to make sure the meter is working properly. The solution should read a pH of 7.0 at 25 degrees C, when I checked the temperature of the solution, it was 20 degrees - which according to the solution label, meant that the meter should be reading 7.01, so I set it to that with the calibration control.

Then I took another reading - still far, far too high. So I just "knee jerked" and stuck the teaspoon of citric acid into the brew. A lot of good it did, about fuck all. OK it did do something, it reduced the pH from 6.36 to 6.29, still a fucking mile away from the 3.3 area I was aiming at.

All I could do was to hit the net for answers! After all, fucking honey isn't supposed to be damn near neutral is it!

I haven't found much out that really answers my questions. So I still don't know what has actually gone wrong. I did try to see if it might be related to the relatively high nutrient level, but I got a pH reading of 7.17 from tap water, and after adding a teaspoon of the nutrient mix, I got a reading of 7.11 and apart from that, I'm no further on in getting an answer.

So what to do ? Well I did find a link (well it was posted at WAH), that explained about using "acidulated water" to reduce a pH reading. I don't think that will work - not that I've got anything that will help me work out what I'd need to add with any accuracy any way!

What I'm intending to do, is to add a couple of teaspoons of acid, give it a good shake and then just add the yeast.

What harm can that do ? Well, I'm guessing it will either start the ferment or it won't. I'm not that patient when it comes to things going wrong. So the brew might still end up down the sink, I'll have to wait and see.

I'll post again, once I've "done what needs doing". Whether it starts to ferment or not.

Pip pip!

Saturday, March 29, 2008

Latest brews (more mead)

So, last weekend was Easter. 2 public holidays so apart from cleaning up the plastic demi-john caps, I was at a bit of a loose end.

I did some digging and found a few recipes at Gotmead. As it happened, I went round to the local supermarket for some milk and noticed that they had their own brand honey on offer - 2 jars for £2.50 - which was too hard to resist. I got as many jars as they had (about 12 I think it was), and as most honey of this nature is a bit mediocre for "proper" mead i.e. it tends to make quite unremarkable meads, I figured I could make a fruit mead (a.k.a. melomel) or a spiced one (a.k.a. metheglin).

Anyway, I decided an "easy" recipe would be best so I decided to make some "Joe Mattioli's Ancient Orange Spiced Mead" (yes I know, strictly speaking it's both melomel and metheglin).

Here's the recipe


1 gallon batch

3 1/2 lbs Clover or your choice honey or blend (will finish sweet)
1 Large orange (later cut in eights or smaller rind and all)
1 small handful of raisins (25 if you count but more or less ok)
1 stick of cinnamon
1 whole clove ( or 2 if you like - these are potent critters)
optional (a pinch of nutmeg and allspice )( very small )
1 teaspoon of Fleishmann’s bread yeast ( now don't get holy on me--- after all this is an ancient mead and that's all we had back then)
Balance water to one gallon

Process:

Use a clean 1 gallon carboy

Dissolve honey in some warm water and put in carboy

Wash orange well to remove any pesticides and slice in eights --add orange (you can push em through opening big boy -- rinds included -- its ok for this mead -- take my word for it -- ignore the experts)

Put in raisins, clove, cinnamon stick, any optional ingredients and fill to 3 inches from the top with cold water. ( need room for some foam -- you can top off with more water after the first few day frenzy)

Shake the heck out of the jug with top on, of course. This is your sophisticated aeration process.

When at room temperature in your kitchen, put in 1 teaspoon of bread yeast. ( No you don't have to rehydrate it first-- the ancients didn't even have that word in their vocabulary-- just put it in and give it a gentle swirl or not)(The yeast can fight for their own territory)

Install water airlock. Put in dark place. It will start working immediately or in an hour. (Don't use grandma's bread yeast she bought years before she passed away in the 90's)( Wait 3 hours before you panic or call me) After major foaming stops in a few days add some water and then keep your hands off of it. (Don't shake it! Don't mess with them yeastees! Let them alone except its okay to open your cabinet to smell every once in a while.

Racking --- Don't you dare
additional feeding --- NO NO
More stirring or shaking -- Your not listening, don't touch

After 2 months and maybe a few days it will slow down to a stop and clear all by itself. (How about that) (You are not so important after all) Then you can put a hose in with a small cloth filter on the end into the clear part and siphon off the golden nectar. If you wait long enough even the oranges will sink to the bottom but I never waited that long. If it is clear it is ready. You don't need a cold basement. It does better in a kitchen in the dark. (Like in a cabinet) likes a little heat (70-80). If it didn't work out... you screwed up and didn't read my instructions (or used grandma's bread yeast she bought years before she passed away) . If it didn't work out then take up another hobby. Mead is not for you. It is too complicated.
If you were successful, which I am 99% certain you will be, then enjoy your mead. When you get ready to make different mead you will probably have to unlearn some of these practices I have taught you, but hey--- This recipe and procedure works with these ingredients so don't knock it. It was your first mead. It was my tenth. Sometimes, even the experts can forget all they know and make good ancient mead.



The only differences I made was that of the 3 batches I've made, 1 used the Orange suggested in the original recipe, whereas the second has lemon and the third has lime.

All three batches are now bubbling away, under the side table in the dining room. I can't wait to see how they turn out.

Just for info, I have made this recipe before, but I used wine yeast. When it had finished (I actually let it go until the fruit had dropped on that occasion), it tasted strongly of cloves. I thought I'd screwed it up. I hadn't really because I just racked it over into 1 gallon jars and chucked it under the stairs to bulk age.

That worked very well, because the strong clove taste faded into the background and it was a pleasant, rich tasting drink. I'm guessing that the strong flavour of cloves originally experienced was caused by both the cloves and by the use of wine yeast which must have fermented it to dry and leaving a bit of a "hot" alcohol taste.

Anyone thinking of having a go at making mead should try this - follow the recipe and apart from the sanitising/sterilizing of the jars etc, it actually takes about 20 minutes to make the must, then it's just a case of waiting it to cool enough to pitch the yeast - then just swirling it around and stoppering the container with a bubbler valve.

All three of these batches were bubbling/fermenting within the hour - in any case, it shouldn't take more than about a day for it to start bubbling/fermenting.

So now I just have to leave it alone and wait.

Oh and I just wrapped the jars with newspaper so to exclude light.

Pip pip!