Saturday, March 17, 2012

Thinking about "stir plates".....

I've been thinking about a stir plate for making a batch too see how I get on. A laboratory stir plate is a device use to rotate a small plastic "stir bar" (a plastic coated magnetic bar). The idea being that a liquid substance can be stirred, without actually having something that needs to be placed in the liquid, but the liquid is rotated.

As you may know, with meads, it's currently recommended that once a batch is mixed up, it's then stirred at least once a day from the initial yeast pitch, until the 1/3rd sugar break (that's when, say, the starting gravity is 1.100 and when the yeast has burned it's way through the sugars 1/3 of the way, that is to say it's gravity is 1.066 a.k.a. the 1/3rd sugar break). The recommendation is a gotmead thing, yet it's not set in concrete, as there are some members there, who will apply aeration to a batch further, some to the 1/2 point and others until completion.

Anyway, by stirring the batch continuously, it's about getting a continuous amount of air/oxygen to the yeast, and that'd normally be associated with making starters etc.

There's also a limited amount of info about making entire batches while they're in a container that contains a stirring bar and that in turn, is placed on a magnetic stir plate.

I've had a look at places like ebay, but more often than not, the stir plate devices are too expensive, but a little hunting finds sites like this one with the instructions on how to build a home made one, using a computer fan. The only thing that needs thinking about, is whether it needs a speed controller or not. Because when a stirring arrangement like this could easily cause a vortex in the liquid, yet whether it would need to run that fast, would need a bit of experimentation, because whether it needs continuous extra air/oxygen is one question, but at the same time, it's likely to help with removing the CO2 that's produced by the yeast, and consequently, help reduce the swings in pH which can be a problem if the pH dips too low - the CO2, with a still batch, is in solution as carbonic acid (apparently), so continuous movement would help remove it by shifting it to a gaseous state.

I've also found a place that sells laboratory glassware and they have 5 litre Erlenmeyer (flat based conical) flasks, which would be big enough to make a whole 1 gallon batch (they've also got other stuff like glass beakers etc). I suspect that with a bit of effort and expense, it will be a worthwhile experiment....

Either way, I'm still thinking about it.

All in the water ?

As I make mainly meads, and as anyone with any sense, or at least the ability to use google would know, to get honey to ferment, you need to water it down - usually to a gravity level that is manageable to wine yeast (what with honey being natures most anti-bacterial, anti-fungal substance etc etc).

Now it also happens that one of the forums that I post at (which, for manners sake, shall remain nameless), there are a majority of American members, a lot of whom, start off making beers.

One of the questions I see frequently, is about water quality i.e. can I use this kind of water, or should I use ........ whatever.

Now it's fair to point out, that pretty much most domestic, piped, utility supplied water, will contain chlorine/chloramine, but depending on where you are, there will also be some trace elements. Great.

Some mead/wine/beer makers then ask about de-ionised or reverse osmosis or distilled water useage. At which point, a lot of people then pop up and go on about yeasts needing nutrients etc and the water being a valuable source of them.

Fair point, except that water, particularly water designated as drinking water, will not have enough trace elements to suppliment yeast. Hell, to have enough nutrient so the yeast is happy, you'd have to use raw fucking sewage!

There's a number of papers that have been written in connection to various brewing type matters, particularly about water quality for different uses. About the only thing that the research seems to come up with, is that for making fermented products, its best if the water is soft water i.e. water that is either neutral or very slightly acidic, and not hard, calcium or magnesium laden water that's found in my area. As that has been found to produce harsher flavours in among the many so called "off flavours" (sorry for the poor choice of words in that).

Well, ok, not so much off flavours, as minor flavouring issues, but it often depends on what's being made. For example, with distilled beverages, hard water has been found to produce a harshness, sometimes described as almost a bitterness undertone to the taste of vodkas and other "clear" spirits.

Lets face it, this would be mainly a problem with the spirits and beer industries, not "proper" wine (wines made from grapes), because they use 100% grape juice for their product. Whereas the others, including meads and country wines, water is used to reduce concentration of either sugars or colours/flavours.

Oh, and before I finish, so called "spring" water, may actually come from a spring, or it might, depending on where you are, just be a marketing thing. EU regulations state that to be called/labelled as "spring" water, the water must be bottled at the source i.e. the actual spring.

So, the result is like this. If you like the taste of the water you regularly drink, whether it comes from a tap/fawcet/spiggot, or a well, or a spring, then it's probably fine to use. If, like me, you know that your local supply might have brewing/mead making/wine making issues, then it's also fine to use DI/RO/distilled water. Just that those types will have been processed and probably have little dissolved oxygen left in them, so it may be prudent to aerate the hell out of them to get some dissolved oxygen into them (and in any case, if you're like me and making mead, then you should have read the Gotmead NewBee guide, and should be aware about the recommended aeration methods/techniques, along with the usual SNA/staggered nutrient addition as recommended for meads).

It doesn't really matter whether you shake the hell out of it, use a whisk/immersion blender (I tend to mix my honey in a sanitised liquidiser, as that mixes it up well, and also aerates it nicely), airstone for a fish tank, or as you may see some people doing around the bazaars/forums/websites etc, bubbling pure compressed O2 through a stainless steel airstone (but I think that's just a little bit too anal - and the gas isn't easy to get here either)..

As for the nutrients, well those (irrespective of whether you use a branded, combined nutrient like Tronozymol, FermaidK, Fermax or whatever - seemingly known to the US side of mead making as "energiser", or whether you use that and augment it with di-ammonium phosphate/DAP - again, usually referred to as "Nutrient" to the US side) should be added by yourself, to ensure that when making a mead, or whatever else it is that you're doing, that the yeast have enough food from sugars, and nutrients/nutrients and energiser (whatever you call them) to be able to do their thing.....

Saturday, March 03, 2012

JAO/Joe's Ancient Orange recipe (before I forget)...

So, I'm posting a copy of the well known JAO recipe. Not because I need too, but because whenever I need to find a copy of it, I have to dig around for it, so now I'll know where to get a copy from.

Oh and I copied this from the "Gotmead NewBee guide".


Joe’s Ancient Orange and Spice Mead
A little caveat before we continue.  This recipe flies in the face of just about all standard brewing methods used to make consistent and good Meads.  It was created by Joe Mattioli to make a fast and tasty drink out of ingredients found in most kitchens.  It is therefore perfect for the beginner, which has resulted in it being perhaps the most popular Mead recipe available on the internet.  As Joe himself says “It is so simple to make and you can make it without much equipment and with a multitude of variations. This could be a first Mead for the novice as it is almost foolproof. It is a bit unorthodox but it has never failed me or the friends I have shared it with. (snip)...it will be sweet, complex and tasty.”  Follow the instructions exactly as provided and you cannot go wrong.  If you want to make larger batches, just scale up the recipe keeping all ingredients in the same proportion.

1 gallon batch
3 1/2 lbs Clover or your choice honey or blend (will finish sweet)
1 Large orange (later cut in eights or smaller, rind and all)
1 small handful of raisins (25 if you count but more or less ok)
1 stick of cinnamon
1 whole clove ( or 2 if you like - these are potent critters)
optional - a pinch of nutmeg and allspice (very small )
1 teaspoon of Fleishmann’s bread yeast ( now don't get holy on me--- after all this is an ancient mead and that's all we had back then)
Balance water to one gallon
Process:
Use a clean 1 gallon carboy
Dissolve honey in some warm water and put in carboy
Wash orange well to remove any pesticides and slice in eights --add orange (you can push em through opening big boy -- rinds included -- its ok for this mead -- take my word for it -- ignore the experts)
Put in raisins, clove, cinnamon stick, any optional ingredients and fill to 3 inches from the top with cold water. ( need room for some foam -- you can top off with more water after the first few days frenzy)
Shake the heck out of the jug with top on, of course. This is your sophisticated aeration process.
When at room temperature in your kitchen, put in 1 teaspoon of bread yeast. ( No you don't have to rehydrate it first-- the ancients didn't even have that word in their vocabulary-- just put it in and give it a gentle swirl or not)(The yeast can fight for their own territory)
Install water airlock. Put in dark place. It will start working immediately or in an hour. (Don't use grandma's bread yeast she bought years before she passed away in the 90's - wait 3 hours before you panic or call me) After major foaming stops in a few days add some water and then keep your hands off of it. (Don't shake it! Don't mess with them yeasties ! Let them alone except its okay to open your cabinet to smell every once in a while).
Racking --- Don't you dare
additional feeding --- NO NO
More stirring or shaking -- Your not listening, don't touch

After 2 months and maybe a few days it will slow down to a stop and clear all by itself. (How about that, you are not so important after all) Then you can put a hose in with a small cloth filter on the end into the clear part and siphon off the golden nectar. If you wait long enough even the oranges will sink to the bottom but I never waited that long. If it is clear it is ready. You don't need a cold basement. It does better in a kitchen in the dark. (Like in a cabinet), likes a little heat (70-80). If it didn't work out... you screwed up and didn't read my instructions (or used grandma's bread yeast she bought years before she passed away) . If it didn't work out then take up another hobby. Mead is not for you. It is too complicated.
If you were successful, which I am 99% certain you will be, then enjoy your mead. When you get ready to make different mead you will probably have to unlearn some of these practices I have taught you, but hey--- This recipe and procedure works with these ingredients so don't knock it. It was your first mead. It was my tenth. Sometimes, even the experts can forget all they know and make good ancient mead.
And there you have it.  You have made your first Mead.  Now come the steps that must be followed to make a good, and eventually a great Mead.

I should point out, that it's a recipe normally done in US gallons, but I'm not American, so I stick to the numbers but I make it to 1 imperial gallon (4.55 litres instead of 3.78 litres) and it still seems to come out fine.

The thread about it over at gotmead (be warned, it's probably the longest single thread at gotmead, so it's a lot of reading), suggests that any change, however small, "voids the warranty". Which is fair enough, but I can't get the same brand of bread yeast here, so I just use a locally available one, something like Allinsons, or Hovis. It still seems to work out fine.

What I would say, is that some people insist on focusing on the presence of the pith of the orange and the fact that this is quite bitter. What they seem to miss, is that by using bread yeast, it will finish sweet, but it's the bitterness of the pith that balances the residual sugars.

Also, I've made other batches of this and tried various experiments, changing the fruit, using wine yeast etc. Well wine yeast usually ferments it dry, but that also highlights the bitter taste of the pith from the orange and hence it doesn't make for a good dry recipe. Changing the fruit, well the only one that came out even close, was the one where I used lemons instead. Limes where too strong and the mix of lemon and lime just didn't taste good.

So just use the recipe as written and it comes out quite good - not drinkable straight away IMO, I reckon it still needs to be aged, but it works well and seems good after 6 or 12 months. Either way, the choice is yours.

Tuesday, February 28, 2012

Bloody silly idea's ?

I'm not really a traditionalist, though I do make mainly "traditional" meads.

For anyone not knowing, "Traditional" meads are just ones made like wines, but with the use of nutrient etc, that honey lacks, when compared to grape juice i.e. honey, water, yeast, nutrient/energiser and any required winemaking chems.

I'm quite happy to admit that there is some historical evidence for variations, when batches/mixes/recipes have used other ingredients, but given what would have been available (and affordable) in times past, the range of other possible ingredients is going to be limited.

For instance, apple juice (it's fucking juice whether it's cloudy or clear America!) might have been used, but the sort of shit that might be in a "liquid apple pie" only exist in the mind of a modern day idiot!

There is no historical version of chocolate raspberry capsimel, with added mint! That's a fucking "weirdomel". Just like a lot of the recipes that might be found at the various mead making websites (no I won't name any, as this is my personal opinion).

Sure, some of the historical recipes did have limited spices, but limited mainly, by what was available at the time - equally, what was affordable at the time. Likewise, ingredients like the honey and water, may indeed, have been boiled. Though that's likely to be mainly connected with them not knowing any better at the time and needing to sterilise the water, rather than the honey. They may have used herbs of various types, because they were available, but most spices would have been far too expensive, if they were actually available.

Now, this morning, I'm reading about "stove top pasteurisation". I suspect that this is some fools idea of being green/organic/stupid, about how to be able to make a batch to a specific level of alcohol, yet kill off any remaining yeast cells, so that they can back sweeten it. Given that alcohol boils at temperatures lower than water, it seems that it's thought that it should be OK to do this.

I'd like to point out, that the volatile nature of flavour and aroma elements of any product are often affected by heat, and that with modern methods, part of the point is to include as many different flavours and scents as possible. So why in gods name, would any fucking idiot want to heat a batch to try and kill off the yeast ? And still have something that's remotely drinkable ???

A little research would have shown that it's probably, either better to make a batch and use the "step feeding" method, whereby, a base batch is made and then small additional amounts of honey are added, along with careful monitoring of the gravity of such a batch, to build up the alcoholic content to exceed the maximum tolerance of the yeast used, too end up with some residual sugars that can't be fermented by that yeast and just supply flavour/sweetness. The drawback of this, is that higher levels of alcohol in a batch, can need ageing for much longer before the batch is drinkable.

And possible alternative, is to make a batch, then use methods/techniques to get it as clear as possible, and then the batch is filtered with as fine a filter as possible. I'd guess something like a so called "sterile" filter, which I believe is the term applied to filter gauges less that about 0.45 micron diameter. Then it might be possible to back sweeten the batch, because in theory, such fine filtration is capable of removing particles down to the size of bacteria. The downside is that they will also remove some colour pigment, as well as larger sized aroma and flavouring particles...

At the end of the day, it's your brew, so it's up to you what you do with it and the processes that it's exposed too. If you post about something which is patently a fucking stupid idea, then don't be surprised if you take shit over it.......

TTFN

Saturday, February 18, 2012

Guilty as charged.......

Why is it that a lot of newer mead makers, think that if they do this, that or the other, they're gonna discover some magic bullet of the mead making world ?

Or why is it that so many of us, can't be bothered to search for help/clues/answers etc, when there's so much guidance of this type out there ?

Now I never thought I'd find a magic bullet, but I certainly didn't look for enough info. Possibly because when I started out, I'd only hear rumour and stories/mythology of meads, and when I bought a copy of CJJJJJJJJJJJJJJ's "First Steps" book, it was one of his recipes/ideas that caught my eye, which wasn't such a good idea. Likewise, I got my supplies from the supermarket and the local HBS, which also wasn't the best of approaches.

Yes, it did make a mead, but certainly only a mediocre, medium dry mead. But nothing special.

A bit of searching would have led me to at least understand why my materials were crap. Ok, not crap, just not as good quality as I thought.

People seem to think that the higher the alcohol levels, the better the mead will be. That's not to say that there isn't any room for higher alcohol meads, just that they are of a certain type and that can, in turn, cause issues of how they're made, how long they take to make and how long they take to be drinkable etc.

Either that, or they get some strange idea about what ingredients they want to use and then think up some idiotic name "somethingomel" ? Given the minimum amount of info that's available to us about how our historic predecessors actually made their meads, with more info on ingredients and less about how they were used, it stands to reason that the majority of "weirdomels" weren't made for specific reasons. So maybe they should stick to the tried and tested recipes to start with, before increasing their knowledge and skills, and only then try ingredients that don't lend themselves to mead making naturally.....

Ergo, do a search, find a recipe/method etc, read up as much as you can about it, then copy it to make a bench mark version, then search and learn more.

Don't think that because meads are made from honey, that the result is gonna be the same as you might expect from unfermented ingredients, cos it fucking won't. Hell, even just using honey to flavour neutral spirit, is gonna taste different from a properly fermented mead or whatever type......

Saturday, February 11, 2012

I still enjoy making meads but.......

When I look at some of the resources out there, I get a bit pissed off.

There are few standards when it comes to meads. The only "official" ones I can think of, are the ones published by the Polish Government, issued to cover the ones that are made there to a specific type and relate to the ratio of honey and water used. A lot of the Polish ones, would appear to be quite sweet. I don't know for certain....

What I find myself getting impatient with, are people who either try to use very unusual ingredients and/or try making some for the wrong reasons.

Now it's fact that while there's very ancient documentation out there, that mentions meads being drunk at certain places/times and for various reasons, there's not actually very much detail on how they were made. The relatively few recipes/ingredient lists available don't really help. So I for one, am quite greatful to the scientific side of modern wine making in helping to provide both materials and method to be able to get a honey must fermented.

That doesn't mean that I agree with the use of some of the more modern ingredients. For example, coffee. The fucking Saxons and Vikings didn't have coffee, plus those who think it might be a good ingredient are obviously idiots, because I suspect they're thinking of something that has coffee, which has been sweetened with honey, but also has some alcohol in it. Almost something like a "Mia Maria" type liqueur. Yet they forget, that sort of drink is probably "manufactured", rather than fermented like that.

The same applies to many other ingredients.

If you take for example, the locations where the honey wine type drink, known commonly as mead comes from, central and northern Europe, including Scandinavia, then that actually limits the ingredients to honey, some fruit and a few herbs (not spices). Yet when you have a dig round the online resources, so many people, wrongly, think of meads as being spiced. Lets face it, even mulled wines that use spices of any kind, aren't more than 200 to 300 years old. We didn't have the spices then, well certainly not in any quantity that made them affordable enough to use in brewing and wine making.

Also, it doesn't help when you get some of the good people of the US, who like to learn/know about the cultures of some of their long gone "family roots", only to mix them up with the fantasy that emanates from fucking Hollywood. Those wankers are responsible for some of the biggest historical travesties out there. The most glaring of bollocks like this is the "viking helmet with horns". It might have been something from either Hollywood or possibly some victorian era romantic novel shit, or by that other "arch-bullshitter in chief" Sir Walter Scott.

It's fucking idiots like these who're responsible for all sorts of bollocks (tartan, a.k.a. plaid, isn't that historical, it was mainly an invention of regency and victorian weavers and made popular by those period British monarchs).

Anyway, yes, so the use of most ingredients in "modern" meads is either just wrong/incorrect/historically inaccurate or the result of something being needed to act in a certain way, to be able to make the honey must ferment.

If that pisses off half of America, then so be it. Weirdomels are just that, weird. Large slices of European history are completely fabricated, by people who have something to sell, something that sells better if it's got some historical connection and a large array of "mug punters" with too much money to sell "it" too....

Ok, yes. I'll get off my soap box.

Saturday, January 28, 2012

Meads, their making and stupid questions ?

Ok, so when making a mead, there's no real standard. Just various methods and some recipes that have been successful.

Yes there's some archaic and/or historic recipes, but they're invariably to limited in the info that was recorded, especially when it comes to some of the older rhetoric/terminology used.

Again, there's too many variables and that is pretty much why the mead world has ended up using wine making techniques and materials.

One of the problems that does arise, is that while some terms are used to describe slightly different types, some of them are historically accurate, some of the terms should be grouped under the more generic "weirdomel" i.e. the "mel" ending alluding to something made with honey and it being prefixed with weird, as it's ingredients not normally associated with mead making....

Then there's the idiot questions. I want to help, but sometimes just get bored reading, basically, the same question over and over again. I do admire some peoples perseverance when it comes to patience. But I'm starting to get cranky with people who either don't read/research before asking a question, or asking for confirmation, or they ask something so pointless that their question should be ignored or deleted. And yes, I was probably just as bad, but I do try to search/check/read around for my answers first.

A recent question at a forum I frequent, was about the maximum gravity that a honey must could be, before a certain yeast couldn't ferment it.

Ok, "valid question" you might say ? Well I'd say bollocks, it's a pointless question that wasn't even worth the effort to ask...... A lot of yeasts, especially the Lalvin brand ones, have a published tolerance i.e. a level of alcohol that they can ferment a must too before they can't make any more and die off. Ok, great. That doesn't mean that you mightn't want to mix a must that will, with careful management, ferment to that tolerance (perhaps a little higher), and still leave a certain level of residual sugars.

Fair enough ? Got it so far ? Alcoholic drinks will still end up tasting like whatever flavoured syrup after a certain point. I find a lot of dessert meads like that and the 4 that I did the mini taste test a couple of years ago, averaged at about 1.040 FG as sold, and to my taste, were too cloyingly/sickly sweet and not enjoyable. But I suppose that's relative and we all like different tastes.

So in truth, it doesn't matter how high a gravity can be before the yeast can't ferment it, it's just notable to know. Also how high the gravity (starting/original) needs to be to attain a certain level/% of alcohol. Plus some idea of the type of mead that you're aiming to make, so you know where it falls in specification of dry/medium/sweet/dessert - anything else, is bollocks....

Oh, and while I'd agree/admit that we all like different tastes when it comes to our products, there's probably more than a few ingredients that shouldn't be brought within a mile of a ferment. At the same time, the mead maker needs to think about whether certain flavours will actually go together, and less about how it tastes in their dreams! For example, I've seen a recipe for a mead/cyser called "Apple Pie". Now I have to presume, not having tasted it, that it alludes to a dessert type mead that has been made with the expected apple juice, with honey for both alcoholic content and residual sugar for sweetness and the spices usually associated with an apple pie (cinnamon, nutmeg, cloves ? something like that ?).

Anyway, the mead maker needs to recall, that once honey has been fermented, it ceases to taste like honey. Which is one of the reasons that young meads, recently off the sediment, taste fucking awful. Yes, some of the alcohol flavours mellow/blend in, and it sometimes recovers some perception of sweetness, but it won't recover the sweetness. You saw to that, when you fermented the honey/water with the process that is basically the controlled rotting of the sugars in the honey by yeast.

Enough of my rant. If it isn't normally a flavour associated with alcoholic beverages then it probably doesn't belong in a mead................

Sunday, December 11, 2011

Specifically about making meads.....

I keep reading over and over again, at various forums, the same question(s).

So here's a little precis of good technique.

I suggest using Lalvin products, not because I've got anything to gain, but because they publish more info/data about their products than any other yeast producer.

So, to start with, the basic must (must being the mix of honey and water - possibly other ingredients - to make it ready for fermentation) is just honey and water. There's a certain amount of conjecture as to what "good" honey actually is. The problem is that if it's a commercial/branded honey, it's very likely to have been processed specifically for eating/baking etc, which has a potentially adverse effect on the honey i.e. the process of heating and filtering etc, often remove some of the more subtle aroma and flavour compounds, so if possible, you not only want the honey to be pleasing to the taste, but if it's raw and unprocessed, it's likely to be worthy of the title "better". Any "hive debris" like bits of wax, dead bee's etc will fall out or float during the fermentation and clearing, which makes them easily removed.

The heating thing also applies to "cooking" the must (or wort as beer makers are likely to call it). Now there's no need to heat it up really, yes if the honey as crystalised some, then using hand hot tap water is the lesser evil. Personally, I just spoon it out the container, and then blitz it in a food processor with some water. Honey is hygroscopic, so it will take up the water quite readily. This not only mixes it well, but also aerates the must nicely. The additional water required to bring the volume up to the required level is then easily just mixed/stirred in. Additionally, you don't need to "pasteurise" the must either. Honey is natures most anti-bacterial, anti-fungal substance. Plus with the water, well if you like the water straight from the tap etc, then it's fine to use - yes you will find comment around the bazaars that alludes to filtration of various types, both for distilled water and reverse osmosis water. Some people will bang on about those types of water not having any nutrients etc. Well if you're relying on the water for nutrients, then you're likely to be making show meads that don't use other nutrient, but also can make for a long, tortuous ferment, because one thing that honey is deficient in, is nutrients. Yes it has all the fermentable sugars you could want, but it's low on anything else. Those ingredients are normally added later.

Now with your yeast(s), the data that Lallemand/Lalvin publish, refers to grape wines, so there's still room for error, but at least it's better than nothing. It's a handy guide to work out the relative nutrient needs and with honey/meads, even so called "low nutrient" yeasts will need some nutrition. More importantly, it's handy to do a search to find out what you can, because some yeasts make good meads but have a few caveats attached. One such yeast is Lalvin D47. It does make a good mead, but it does have quite a narrow fermentation range, and it appears that it needs to be fermented below 70F/21C, because above that, it has a habit of producing fusels, that can give a very harsh, chemically sort of taste, that can take forever (if at all) to mellow out. Fusel tastes shouldn't be confused with "alcohol hot" taste because while it takes a while to mellow, alcohol hot taste will age out.

I like to rehydrate my yeasts with GoFerm. It's a type of nutrient that is specifically formulated to feed the yeast while it's rehydrating. Plus it's quite normal to use a little bit of must, some water, the appropriate amount of GoFerm and then the yeast is mixed in and it's left until some bubbling/foaming shows on the top of the rehydrating yeast. That mix, is in turn, pitched into the must, I then either cover with a cloth or airlock it, depending on the fermenter used. I then don't add any more nutrients etc until there's visible signs of the ferment commencing and the "lag phase" is over. I will have worked out roughly how much nutrient is needed for the batch and will have halved it to be added in 2 stages. You can break the quantities down more if you want and work out when you want to add them, though there's some anecdotal evidence, that after a certain point in the ferment, the yeast will no longer absorb inorganic nitrogen sources, so only organic sources should be used (I don't have any FermaidO, so I usually use boiled bread yeast to provide late addition nutrient).

So, I've got it mixed, I've rehydrated the yeast with GoFerm (which coincidentally, is low in nitrogen, as that can be harmful to the yeast in this early stage), there's signs of active fermentation, so I know that the yeast colony is large enough to be doing that, I've used a mix of 2 parts FermaidK to 1 part DAP (di-ammonium phosphate), which has been split into 2 doses, the first has been added after the lag phase, so now I aerate it i.e. you can use a spoon or other stirrer, but I'm lazy, so I use an electric whisk. Some people recommend at least twice a day, but I usually aerate once a day. I will test after about 1 or 2 days to see where the gravity has dropped to, as I aim to stop aeration and any further nutrients at the 1/3rd sugar break (which is a drop in gravity of 1/3 when the starting and estimated final gravity have been worked out e.g. if the start is 1.090, then the 1/3rd break is at 1.060, presuming it's finished at 1.000). I will always aerate first, before adding the final nutrients as that can cause the mead to let the CO2 out of solution quickly causing it to foam into an eruption, which is less likely if most of the CO2 has been removed with aeration/stirring, and you get better eruptions from carboys than you do from buckets......

Now, if I'm making a "Traditional" mead (honey, water, nutrients, etc), I will usually ferment it dry and then back sweeten it. I like my meads sweet, but not too sweet. Some of the commercial meads I've found and tried here, have all been too sweet and when tested have a finished/final gravity of up to 1.040 - which is cloyingly sweet for my taste. I like mine at about 1.010 to 1.020 and I like to sweeten them with honey. This is potentially problematic, because the addition of honey can cause an already cleared mead to haze. So I let the ferment finish (finish is after I've had 3 identical gravity readings taken a couple of days apart over the period of a week). I will then stabilise it, which is done to prevent any refermentation starting. I will rack the finished mead onto 1 crushed campden tablet per gallon and 1/2 a teaspoon of sorbate per gallon (sometimes called potassium sorbate, or wine stabiliser). Then while it's still cloudy, but after a couple of days, I'll add a 50/50 honey water syrup up to the required gravity level, the exact level is achieved by taste but also with hydrometer tests. Once it's there, then I'll just clear it with racking and time, any topping up needed is done with either another mead or with vodka. If it's not clear by the time it's aged for 12 months, then I'll use 2 part finings.

That's not perfect practice/technique but it's not a million miles away from the methods suggested in the excellent Gotmead "NewBee Guide" either. It's linked so you can also read it if you want to.....

Sunday, December 04, 2011

A bit of a result there.....

Blagged Honey!
I did a delivery to a local farm on friday, and after chatting with the farmer about the 25 to 30 bee hives I could see in the bushes, just off the road, when he said "did I want some honey", it took me a couple of milliseconds to say yes.

He came back from the farm house with a bucket containing 17 jars, which turn out to be 340gramme jars, so as he said that the bloke who owns the hives wanted the jars back if possible, I've just spent a couple of hours pouring it into a couple of small buckets and rinsing the jars out with warm water.

The jar washings are now sitting in a demi-john (1 gallon size) and I've also blitzed 2lb in a pint of water, to bring the gravity up to somewhere near where I'll want it.

The honey itself, is very sweet, with a light flavour, despite it being quite a golden colour. I'm gonna flip a coin as to whether I use K1-V1116 yeast or D21 yeast, both of which were used by the late Brother Adam of Buckfast Abbey bee breeding and mead making fame during his lifetime.

As the K1V will go to 18% and the D21 to 16% ABV, I'm thinking I'll go for a Sack mead in the 16% area and back sweeten it to about 1.020, so it's sweet to taste but not in a cloying way that some of the commercial meads can be.

What I'll do with the rest of the honey has yet to be decided......

Not a bad blag for a gobby fucker like me eh !

Saturday, October 08, 2011

What, actually, is it that mead makers are trying to do ?

The title of this post is something I've been pondering for a few weeks now.

Why should I be thinking along these lines ? Well, to my mind, "mead is mead, is mead".

Now it's fair to point out, that while meads have been around for at least a couple of millenia, is what we make now the same thing, just an improved version of what the ancients made ?

Yes, it would also be obvious that a lot of the methods/techniques used currently are derived from the world of wine making, more specifically, making "grape" wines (not wines made from other fruit).

What it does do, is, to my mind, is make people want to compare "proper" wines to meads a.k.a. honey wine. Yet I don't see the comparison, other than them both being alcoholic drinks. After all, the only thing they have in common other than the alcohol is the presence of fermentable sugars in the unfermented "must". Grapes have different components to honey. Honey has considerably more sugars, but little of the other nutrient type elements that are present in grapes.

So called "proper" wines are made from pure grape juice, meads are made mainly from watered down honey (there's no chance in hell of fermenting pure honey). It's almost as pointless a comparison to that of wine and brandy, or beer and whiskey. They've both got alcohol in them, but that's where it stops.

Hence, should we describe mead as "honey wine", or more correctly, as a fermented honey drink ?

Yes, I gloss over the different variations of meads i.e. melomels, metheglyns, cysers, pyments, etc etc, as it seems that those are just ways of adding different flavours to the honey must fermentation.......

Equally, you can find commercially made meads, though from what I've managed to find/taste, most of those are from existing vineyards/wineries and less from makers who make specifically meads. Should we, as a loose community of like minded people, gather together our experiences, into something "more concrete" ? So some proper research can be done and published, or is it enough to remain on the periphery of the wine making world, so "proper wine makers" can continue to sneer down their collective noses ?

The only place that seems to have any laid down/statutory standards for meads, would appear to be Poland. Whether anywhere else has any mandatory standards for what we term "Mead", I've yet to find out.

Does it mean then, that without any standard, that all we're doing is taking part in some global pissing contest ? "My meads better than your mead?", with a small number of people who are enthusiastic enough about it, to learn as much as they can and then pass on this collected knowledge ?

Or is it something else ?

I mean, lets face it, to try and compete directly with the entrenched wine making world is pretty much a waste of time. Yes, there is a small market for commercial mead making, but the "wine lobby" is a huge, well funded, well advertised section of the alcohol production industry. Anything they consider a threat, is more than likely, going to be stamped out of existence (if that's possible). They don't want anyone else to have a share of the financial pie that they enjoy so much........

Apart from anything else, making meads does seem to take longer than making wines. Yes there's a few short cuts that can be taken, but by and large, it's likely to take many years to have something that is drinkable.....

I just don't know..... I suppose I'll just carry on making my batches to see what I can produce!